> For the complete documentation index, see [llms.txt](https://docs.seasketch.org/seasketch-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.seasketch.org/seasketch-documentation/administrators-guide/geographies.md).

# Geographies

Geographies serve two primary purposes in SeaSketch

1. They define the **planning area** where users digitize sketches. Sketches drawn beyond these boundaries are *clipped* to this area.
2. Planning areas can be subdivided into multiple geographies to provide **summary statistics in reports**.

#### A concrete example

Let's consider a SeaSketch project used to plan a Marine Protected Area network in a fictional country. This country has a long coastline, with 3 distinct biogeographic zones (offshore, northern, and southern nearshore). The government has set a goal of protecting 30% of each of these 3 areas. In such a project we would have 4 *geographies* — the Exclusive Economic Zone, Offshore, Northern Nearshore, and Southern Nearshore. Our MPA sketch class would use the EEZ as a clipping geography, where any overlap with land or areas outside the EEZ would be erased. In reports evaluating the MPA network, percent area protected by MPAs could be shown for the entire EEZ and for each biogeography in order to ensure proportional coverage across all 3.

<figure><img src="https://3101925571-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FmrOjheW9v23epAZJDsmJ%2Fuploads%2FVg4pZGFFC9PZe4hy2wmR%2FPolished%20EEZ%20MPA%20Collection%20Report%20Map.png?alt=media&amp;token=5096a876-c15a-4fb0-b2fe-7d0ace0c035f" alt=""><figcaption></figcaption></figure>

## Choosing a geography in a new project

When you first create a project, you are given the opportunity to choose one or more Exclusive Economic Zones. You can also create both nearshore and offshore zones, based on the 12 nautical mile territorial seas. These options are based on boundaries from [MarineRegions.org](https://marineregions.org/), with improved coastline clipping using OpenStreetMap data from the [Daylight Project](https://daylightmap.org/coastlines.html). It is highly recommended you use these options as the data have been carefully prepared for optimal performance when using the reporting tools. If you need to use a different basis for your geography or coastline, see the instructions for [Custom geographies](#custom-geographies).

{% hint style="info" %}
If your project was created before summer of 2026 you may not have any Geographies yet assigned as this was a new feature introduced with the reporting tools. See the instructions below for assigning one.
{% endhint %}

## Managing geographies in an existing project

<figure><img src="https://3101925571-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FmrOjheW9v23epAZJDsmJ%2Fuploads%2FhfZJrSJg3MkHsM8nVTsV%2FScreenshot%202026-11-17%20at%203.39.08%E2%80%AFPM.png?alt=media&amp;token=dceb295d-76a6-41b2-a79a-5dc420088533" alt=""><figcaption></figcaption></figure>

Navigate to the Geography section of the administrative interface to view and manage Geographies assigned to your project. Here you can visualize these zones on the map, draw polygons to test how clipping to their boundaries would work when assigned to a sketch class, and add and edit Geography configuration.

{% hint style="info" %}
While the reporting and sketching system is adaptable and can handle revisions to the project's Geographies, such changes should be limited in order to avoid having to re-clip user sketches or recalculate summary statistics used in reporting. Drastically changing geography boundaries to exclude areas previously accessible for planning would render user input invalid and cause confusion.&#x20;
{% endhint %}

#### Creating a new geography

When creating a new geography, you have the option to base it on Marine Regions maritime boundaries, the High Seas (areas beyond national jurisdiction), on land, or using a [Custom Geography](#custom-geographies) with your own data. Assuming you choose Marine Regions, you can select one or more Exclusive Economic Zones, and will then be presented with the following options:

<figure><img src="https://3101925571-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FmrOjheW9v23epAZJDsmJ%2Fuploads%2FflZJFIz6Qoi1I8rgCmOv%2FScreenshot%202026-11-17%20at%203.51.06%E2%80%AFPM.png?alt=media&amp;token=33d976b6-8f9c-44c1-a286-2fbee30ad91a" alt=""><figcaption></figcaption></figure>

In almost all cases you will want to exclude land from the geography, otherwise it will count in reports as part of the total area of the zone. You may choose whether to also include offshore and/or nearshore geographies based on the Territorial Sea (12 nm boundary).

## Sketch class clipping

In the Settings tab of each Sketch Class administrative form, you will find a dropdown that can be used to select the geography that new sketches are clipped to.

<figure><img src="https://3101925571-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FmrOjheW9v23epAZJDsmJ%2Fuploads%2FuVUmz3Fi8qK9E4S9nRs2%2FScreenshot%202026-11-17%20at%203.56.41%E2%80%AFPM.png?alt=media&amp;token=b5269bcc-25a0-4451-a78c-1b33483e26b2" alt="" width="375"><figcaption></figcaption></figure>

If your project has multiple Sketch Classes, each can be assigned to different geographies if desired. For example, in our example project we could have different Offshore and Nearshore classes, and each could be limited to their respective zones.

## Custom geographies

If you have a planning area that is a subset of an Exclusive Economic Zone, the boundaries do not match what is available in the Marine Regions dataset, or you require a specific coastline, it is possible to select polygon layers from your overlay list and use them as the basis for custom geographies. Keep in mind the following:

* Topology is important. A geography must be represented by a single Polygon or Multipolygon feature.
* A single layer with several Polygon or Multipolygon features may be used to create multiple Geographies, with each feature representing a distinct Geography.
* The recommended way to represent coastlines is to produce a boundary dataset with no "holes" representing the coast, and choosing the "Erase Land" option to use the OpenStreetMap coastline for clipping out land.
* The performance of sketch clipping and overlay analysis in reports is highly dependent on boundary complexity. Using unnecessarily complex boundaries or providing features with holes representing coastlines can drastically degrade performance.

{% hint style="info" %}
Custom Geographies can be difficult to configure properly. Please contact <support@seasketch.org> to discuss your needs if you are thinking about using this feature.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.seasketch.org/seasketch-documentation/administrators-guide/geographies.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
